Transform unused rooftops into reliable, clean sources of renewable energy
Solar Laminate PVL-Series
Model PVL-136
Photovoltaic technology has traditionally been limited to rigid panel design. The Solar Laminate PVL series is a new way to look at photovoltaic solutions for the commercial, industrial, and institutional Building Integrated Photovoltaic (BIPV) markets. Through the use of fully-adhered, lightweight, flexible PV cells, Outpost Solar offers a renewable generation solution that is not subject to many of the complications of rigid panel rooftop systems.
Solar Laminate PVL series is designed for flat and low-pitch roof installations. The system may be installed on new roofs or integrated as part of re-roof projects. Ideally suited for 16” standing-seam metal roofs, the thin film system is also a great fit for membrane roofs. Outpost Solar has teamed with the world’s leading manufacturer of SBS bitumen membrane roofing material to offer an industry leading, single source warranty for both the PV system and roof.
Flexible cells: more profitable, more practical
The main feature of Solar Laminate PVL is the use of flexible photovoltaic cells, which are superior to rigid panels in several significant areas:
- much lighter weight than rigid panel construction, adding no impact on structural calculations
- higher annual electrical output during less-than-optimal conditions such as cloudiness, snow cover, or if the panels are soiled
- “triple junction” technology, comprised of three superimposed layers of cells, enabling the PV cell to produce the maximum electrical output across the entire solar spectrum
- no shadow area since the flexible cells are fully adhered directly to the roof surface
- rolled nature of the flexible cells means handling is simple and cells are impact-resistant
Installation: a simple, reliable solution with no roof penetrations
- The lightweight cells, in rolled form, are fully adhered to the roof with PV adhesive
- No roof penetrations mean better waterproofing performance
- The electrical network is easily accessible for maintenance
- Single source, 20-year system and membrane warranty available for qualifying installations
- Outpost Solar provides a range of financing options that take advantage of federal, regional, state, and local programs
Technical Data
High Temperature and Low Light Performance
- 20 Year Warranty on Power Output at 80%
- Quick-Connect Terminals*
- Bypass Diodes for Shadow Tolerance
- UL 1703 Listed to 600 VDC
- IEC 61646 and 61730, TUV certification pending
Performance Characteristics
- Rated Power (P max): 136 Wp
- Production Tolerance: ± 5%
Construction Characteristics
| Dimensions: |
Length: 5486 mm (216")
Width: 394 mm (15.5")
Depth: 4 mm (0.2"), 16 mm (0.6") including potted terminal housing assembly |
| Weight: |
7.7 kg (17.0 lbs) |
| Output Cables: |
4 mm2 (12 AWG) cable with weatherproof DC rated quick-connect terminals* 560 mm (22") length |
| By-pass Diodes: |
Connected across every solar cell |
| Laminate Encapsulation: |
Durable ETFE (e.g. Tefzel®) high light-transmissive polymer |
| Adhesive: |
Ethylene propylene copolymer adhesive-sealant with microbial inhibitor |
| Cell Type: |
22 triple junction amorphous silicon solar cells 356 mm x 239 mm (14.4" x 9.4") connected in series |
Qualifications and Safety
Listed by Underwriter’s Laboratories for electrical and fire safety (Class A Max. Slope 2/12, Class B Max. Slope 3/12, Class C Unlimited Slope fire ratings) for use in systems up to 600 VDC
Laminate Standard Configuration
Photovoltaic laminate with potted terminal housing assembly with output cables quick-connect terminals*
Optional Configuration
Photovoltaic laminate with junction box
Application Criterion
- New or qualified new roof installations
- Installation by certified installers only
- Installation temperature between 10° C - 40° C (50° F - 100° F)
- Maximum roof temperature 85° C (185° F)
- No ponding water
- Refer to manufacturer’s installation guide for approved substrates and installation methods
*e.g., Multi-Contact (MC®) Connectors
|
